Contact ShapeShift Technologies

Let’s build your vision together. Contact us today to discuss your needs.

Get In Touch
Follow Us

How to brief a project

The faster route to a useful answer is to send the geometry and the constraints together. A render on its own tells us what it should look like. It does not tell us what it has to survive.

What to send

  • Geometry. A 3D model if you have one, elevations and sections if you do not. Rhino, Revit and IFC are all fine.
  • Extent. Approximate area in square metres, or panel count, and how much of it repeats.
  • Application. External wall, internal lining, soffit, formwork, artwork or standalone element. This is what decides the material and the compliance pathway.
  • Compliance. Building class, rise in storeys, and whether a non-combustible material is required. If the fire strategy is already written, send the relevant clause.
  • Finish. Colour, texture and sheen intent, and any adjacent material the element has to sit against.
  • Programme. Target dates for design freeze, first delivery and practical completion.

What comes back

For a budget enquiry, an indicative rate and a material recommendation with the panelisation assumptions stated, so you can see what the number is based on. For a technical enquiry, the relevant test data and certificates. For a tender, a priced package with the engineering scope, documentation deliverables and delivery sequence set out.

Office hours and locations

The Brisbane office is open Monday to Friday, 9:00 to 17:00 AEST, at 107/33 Longland Street, Newstead QLD 4006. Manufacturing runs from our Batam facility. Enquiries outside Australian hours are handled by email at create@shapeshift.tech.

If you are early in design and unsure whether a geometry is buildable, send it anyway. A short feasibility conversation at design development is cheaper for everyone than an RFI at shop drawing stage. See design capabilities for what we produce at each stage.