Location: 55 Market St, Sydney NSW 2000
Scope: Roof/Celling Panels integrated with HVAC
Completion Year: 2023
Architect: Batessmart
Builder/Contractor: Built/Permasteelisa
ShapeShift Product: ShapeShell™-RT panels

The Lotte Duty Free project involved the development and manufacture of lightweight reinforced composite panels for complex architectural elements. ShapeShift Technologies was engaged to provide design, engineering, tooling, manufacturing, and supply of ShapeShell™-RT panels for the project, including architectural petals, circulation ceilings, and LED display frames.
The Lotte Duty Free project is an internal roof/ceiling project, covering approximately 1,188 m² of 3D surface area, comprising 710 m² of petals and columns, 466 m² of circulation ceiling, and 11.7 m² of display frames.
The project required lightweight composite components capable of accommodating complex architectural geometry while maintaining manufacturing accuracy and practical transportation requirements.
The petals and ceiling elements incorporated organic and curved geometries, requiring accurate tooling and repeatable manufacturing. ShapeShift Technologies addressed this through large-format 5-axis CNC tooling, with tooling manufactured to within ±2 mm of the supplied 3D geometry.
Panelisation was also an important consideration. The larger elements were divided into manageable sections to facilitate manufacturing, shipping, handling and installation while reducing installation time. Panels were designed to fit within the dimensions of a 40-foot High Cube shipping container.
For the roof panels, the manufacturing arrangement required a dedicated flat-table setup, glass tooling surfaces, prepared edges and inserts, and a defined composite laminate system.
The project covered the manufacture and supply of lightweight composite roof and ceiling panels, combining hand-laminated flat roof panels with complex ShapeShell™-RT ceiling elements.
ShapeShell™-RT ceiling panels were specified at approximately 7–10 mm skin thickness and 20 kg/m², including integrated bulkheads.
ShapeShift’s scope included 3D design, engineering, tooling, fabrication and supply, with integrated structural bulkheads incorporated where required.
Surface Finish: Ceiling panels were supplied primed only, ready for subsequent coating and painting by others.
ShapeShift Technologies provides lightweight, strong, and high-quality internal solutions for modern architectural projects. If you’re ready to bring your vision to life with ShapeShell’s advanced FRP materials, contact us today!
Discuss Your Needs
