Interior atrium lined with tall white vertical fins beside a curved balcony

Production Capabilities

ShapeShift manufactures GRC (GFRC) facade panels, fibre reinforced thermoset (FRP) elements and reinforced gypsum mouldings from its own factory, for architects, builders and developers in Australia and overseas. Two buildings give 100,000 sq ft of factory space and the same again outdoors, producing around 40,000 sq ft a month. Capacity scales two to three times on six months’ notice, and the quality management system has held ISO 9001 accreditation for ten years.

Core Capabilities

Our proprietary fibre reinforced materials, such as ShapeShell™-RT (Reinforced Thermoset), ShapeShell™-RC (Reinforced Concrete), and ShapeShell™-RG (Reinforced Gypsum), outperform traditional materials by combining lightweight flexibility with unparalleled durability and structural integrity. These advanced composites deliver superior strength, impact resistance, and environmental adaptability. 

Manufacturing Capabilities

Two buildings: ​

  • 100,000 sq ft / 9,290 sqm – factory space
  • 100,000 sq ft / 9,290 sqm – outdoor space​

​
Production Capacity:​

  • 40,000 sq ft or 3,716 sqm/month​
  • 480,000 sq ft or 44,593 sqm/year​

Rapid Scalable Production Capacity​

Capacity can be scaled two to three times with 6 months’ notice to meet increased demand. ​Strategic positioning allows rapid expansion enabling a full-scale production setup. 2024 Production Reference: Factory output of approximately 50,000 m² (540,000 ft²) last year.​

Experience and accreditation

  • 25 years of experience working with complex 3D CAD/CAM designs.​
  • ​A vertically integrated company incorporating experienced design and engineering teams, CNC machinery, and in-house manufacturing.​
  • ​Proven performance in the construction industry, having collaborated with Tier 1 builders worldwide.​
  • ​Multiple and easily accessible fabrication facilities in Asia that are scalable.​
  • ​A detailed Quality Management System accredited to ISO 9001 has been accredited for the last 10 years. ​

Precision Manufacturing

Our advanced manufacturing capabilities allow us to deliver large-scale, highly complex structures with exceptional accuracy: 

  • Largest CNC Machinery in the Southern Hemisphere: Custom-built 5-axis CNC machines provide precision for even the most intricate and large designs. 
  • Aerospace Manufacturing Expertise: Leveraging aerospace-grade processes ensures consistent mechanical performance and reliability. 
  • 3D Digital Design: Integrated digital workflows and mould technology create opportunities for previously unachievable shapes and structures. 

By managing every stage in-house, we ensure quality control and adherence to project timelines, regardless of size or complexity. ShapeShift Technologies is ISO 9001 certified, demonstrating our commitment to maintaining the highest international standards of quality management across all facets of production and delivery. 

What comes out of the factory

Three substrate families, one operation. ShapeShell™-RC is glass fibre reinforced concrete, GRC in Australia and the UK, GFRC in North America and much of Asia, and it is the non-combustible facade panel: AS/NZS 1530.1, not deemed combustible. ShapeShell™-RT is a fibre reinforced thermoset, the material usually called FRP, used where the geometry is complex and the weight matters. ShapeShell™-RG is reinforced gypsum for interior cornices, columns and panels. The standard range and the bespoke commissions come off the same lines.

Where the work is done

Head office is in Newstead, Brisbane. Manufacturing is on Batam Island, Indonesia, with further scalable fabrication capacity in Asia. Design and engineering, CNC machining and manufacturing are all in-house, which is what lets a project run from render to installation without handing off between suppliers. Overseas enquiries go through the same contact form as Australian ones.

Capacity at a glance

Measure
Figure
Factory space
100,000 sq ft / 9,290 sqm
Outdoor space
100,000 sq ft / 9,290 sqm
Monthly output
40,000 sq ft / 3,716 sqm
Annual output
480,000 sq ft / 44,593 sqm
CNC machining envelope
Up to 36 m x 5 m x 3 m
Quality system
ISO 9001 accredited for ten years
Scaling
Two to three times capacity on six months’ notice

The outdoor space matters more than it sounds. Large facade and formwork elements need somewhere to cure, be trial assembled and be staged in delivery sequence, and that is usually what limits a factory long before the machines do.

What happens in the factory

  1. Tooling. Patterns and moulds are CNC machined in house from the approved 3D model, up to 36 m x 5 m x 3 m in a single piece. Larger geometries are modularised.
  2. Manufacture. ShapeShell-RC is sprayed or premixed GRC, ShapeShell-RT is laminated FRP composite, ShapeShell-RG is cast glass reinforced gypsum. The same tooling discipline applies across all three.
  3. Backing and fixings. Elements are built with their backing structure and fixing points in place, so the site crew installs a complete unit.
  4. Finish. Colour, texture and sheen are applied and matched against an approved physical sample.
  5. Scan and inspect. Elements are 3D scanned and compared against the source model, with QA inspection under the ISO 9001 system.
  6. Trial assembly and dispatch. Multi part assemblies are fitted in the factory, marked, then batched to the install sequence.

What this means for a projects

Two things follow from producing at this scale under one quality system. The first is that a large facade package does not have to be split across suppliers to make the dates, which removes the interface risk that comes with two fabricators meeting at a joint. The second is that fabrication runs in parallel with civil and structural works, so the facade arrives finished and the site activity is installation rather than construction.

Capacity scales two to three times on six months’ notice. For a Tier 1 builder that is the difference between a supplier who can take a stage two and one who cannot.

Production FAQs

What is the largest single element you can produce?

Tooling can be CNC machined up to 36 m x 5 m x 3 m in one piece. In practice the limit on a finished element is usually the transport envelope and the crane, not the mould, so oversized geometry is modularised and trial assembled in the factory first.

How much can you produce in a month?

Around 40,000 sq ft, or 3,716 square metres, which is 480,000 sq ft a year. Capacity scales two to three times with six months’ notice.

Are you certified?

The quality management system has held ISO 9001 accreditation for ten years. Elements are 3D scanned against the source model and inspected under that system before dispatch.

Can you handle a full facade package on a Tier 1 project?

Yes, and keeping it with one fabricator is usually the point. Splitting a package across suppliers creates an interface at every joint where two sets of tooling and two sets of tolerances meet.

Where is manufacturing located?

Manufacturing runs from our Batam facility, with the Australian office in Newstead, Brisbane. Design, engineering and project management sit with the Australian team.