Interchange Pavilion

Sydney, NSW

Project Details

Architect: Chris Fox

Contractor: Mirvac

Installer: ACS Groundworks

Product: ShapeShell™-RC

Surface Area: 15 tonnes

Application: Artwork Structure

Responsibility: Design, Engineer & Manufacture of Feature Elements

The Interchange Pavilion at South Eveleigh, Sydney, is a landmark public art installation designed by Australian artist and architect Chris Fox. Commissioned by Mirvac and its consortium partners, the pavilion reimagines the site’s rich rail history through a striking sculptural form that invites visitors to gather, reflect, and connect. The work was constructed using an innovative palette of over 250 metres of stainless steel ground rails, 15 tonnes of robotically moulded GRC (glass reinforced concrete), 1,400 router-cut hardwood pieces, and a 14-tonne aluminium structure, creating a 350 m² sculptural space that also functions as a community amphitheatre.

The structure not only celebrates Sydney’s railway heritage but also functions as a space for performance, reflection, and social interaction. Its layered materiality references the industrial fabric of Eveleigh while embracing contemporary techniques of robotic moulding and CNC fabrication. Commissioned by Mirvac in collaboration with Carriageworks and other partners, the Interchange Pavilion reflects a broader public art strategy that integrates cultural expression with placemaking.

By merging artistry, engineering, and architecture, the pavilion embodies the spirit of interchange—where histories overlap, paths cross, and communities gather—transforming South Eveleigh into a precinct that honours its past while shaping a dynamic, inclusive future.

Project overview

The Interchange Pavilion at Eveleigh in Sydney is a public art installation by artist and architect Chris Fox that reworks the site’s rail history into a 350 square metre sculptural space doubling as a community amphitheatre. ShapeShift Technologies supplied 15 tonnes of robotically moulded ShapeShell™-RC glass reinforced concrete. The completed work combines that GRC with more than 250 metres of stainless steel ground rails, 1,400 router-cut hardwood pieces and a 14 tonne aluminium structure.

The challenge: four materials that all behave differently

The interesting problem here is not any one material, it is the assembly. Stainless steel, GRC, hardwood and aluminium expand and contract at different rates, respond differently to moisture, and are made to entirely different tolerances. Steel rail is a rolled industrial product. Hardwood moves with humidity for its whole life. Aluminium has a large thermal movement. GRC is a cement product with its own shrinkage behaviour.

Bringing four materials into contact in a permanent outdoor installation means every interface has to allow for the fact that the two sides of it will not stay the same size. Joints that are detailed as though everything is static will open, bind or crack through a couple of Sydney summers. Each material also has to be dimensioned so that the accumulated tolerance of the others does not land on it.

Why GRC belongs in a work like this

Eveleigh is a former railway workshop precinct and its character is industrial: steel, timber and concrete. GRC lets the installation carry concrete as a material in its own right rather than as an imitation, which is what the layered reference to the site depends on.

The practical reasons are just as strong. This is a permanent public artwork in an open precinct with no supervision, which people sit on, walk past, lean against and gather in. Its surfaces are handled. A cement-based element with its colour and texture in the material rather than in a coating survives that without needing a maintenance programme, and weathers the way the surrounding industrial fabric weathers. Nothing to peel, nothing to repaint.

Robotic moulding and why it matters at 15 tonnes

The GRC elements were robotically moulded. On a sculptural form that is a meaningful distinction rather than a technical flourish.

Hand-applied GRC relies on the operator to keep section thickness even across a complex surface, and variation in thickness produces variation in strength, weight and how the surface finishes. On a work where each element has a different geometry and there is no repeated part to calibrate against, machine control over the moulding process is what keeps the section consistent and the geometry true to the digital model across 15 tonnes of material.

That consistency then feeds back into the assembly problem above. Elements that are dimensionally reliable can be detailed to meet steel, timber and aluminium with predictable tolerances. Elements that vary cannot.

Related reading